Samsung SGH-I600 Service Manual page 31

Exploded View/Disassembly&Assembly Instructions
9
1) Put PBA inside the Front Case.
2) Attach POWER KEY, VOLUME
KEY, and FUNCTION KEY.
1) Notice that other material should not be inserted
to LCD and WINDOW.
2) KEY's groove does so that head toward down and
assembles.
3) Assemble POWER KEY, FUNCTION KEY carving a
seal after is rapidly.
11
1) Joint SPK-MOTOR connector.
1) Press SPK-MOTOR connector so that is sonant
'Exactly' vertically.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
10
1) Joint the RECEIVER connector.
1) Make the RECEIVER wire groove that gouge the
PBA.
2) Observe in polarity of the RECEIVER connector.
12
1) Assemble the Rear Case with the
Front Case.
1) First, assemble top portion Locker, and both side.
2) Press with hand in case of the top portion does
not fit certainly after assembly.
5-10