13
1) Separate the shield-can and the PBA.
1) Notice that components of the PBA should not be
in damage
15
1) Insert tweezers into the backside of
the LCD module and detach the double
-stick tape as shown in the figure.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Exploded View/Disassembly&Assembly Instructions
14
1) Unscrew two points in the INTENNA.
2) Detach the INTENNA Wire from the
shield-can.
16
1) Insert tweezers into the backside of
the LCD module and detach the double
-stick tape as shown in the figure.
2) Disjoint LCD module.
5-7