Timer Operation - Sharp MD-M2H Operation Manual

TIMER OPERATION

Before setting the timer, make sure that the
clock setting is correct. (Page 9)
Timer playback
Before timer playback, the following preparations
are required.
I Load a CD, MD.
I Preset the radio station.
(Remote control operation)
3
5,6,7,8
1,10
1
Press the ON/STAND-BY button to turn the
power on.
2
Press the MD, CD, TUNER(BAND), AUX button
to select desired function.
3
Press the TIMER button to select the timer play-
back mode.
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL
REMAIN
4
Whilst "f PLAY" is flashing, press the ENTER
button.
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL
REMAIN
5
Within 5 seconds, press the
set the hour to start, and then press the ENTER
button.
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL
REMAIN
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL
REMAIN
6
Press the or button to set the minute to
start, and then press the ENTER button.
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL
REMAIN
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL
REMAIN
I If not set manually, the ending time will automati-
cally be set for one hour after the starting time.
7
8
4,5,6,7,8
9
2
9
I Be careful not to turn the volume up too high.
10
I The TIMER STAND-BY indicator will light up.
11
12
I "f PLAY" will disappear, and the timer mode will
PLAY
PLAY
REC
SLEEP
Notes:
I The timer cannot control the component con-
PLAY
I When the CD or MD is played to the end, play-
REC
SLEEP
or button to
To change the programmed contents:
Start again from step 1.
PLAY
To stop playback during timer playback:
REC
SLEEP
Press the ON/STAND-BY button to enter the stand-
PLAY
by mode.
REC
SLEEP
To confirm the timer setting:
Press the TIMER button once.
I The turn-on time, the turn-off time and name of
PLAY
To cancel timer operation: 1
REC
SLEEP
PLAY 2
REC
SLEEP
39
Press the or button to set the hour to stop,
then press the ENTER button.
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL
REMAIN
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL
REMAIN
Press the or button to set the minute to
stop, then press the ENTER button.
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL
REMAIN
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL
REMAIN
Press the VOLUME button to adjust the sound
volume.
Press the ON/STAND-BY button to enter the
stand-by mode.
When the timer start time is reached, timer play-
back will start.
When the timer end time is reached, timer play-
back will stop.
be cancelled.
The unit will enter the stand-by mode.
nected to the Auxiliary Input sockets.
back will stop before the stop time.
If you wish to play to the stop time, set repeat
play for the CD or MD.
sound source will be displayed.
Whilst in the timer stand-by mode, press the ON/
STAND-BY button to turn the power on.
Press the TIMER button repeatedly to turn off
the timer, "f PLAY" will go out.
PLAY
REC
SLEEP
PLAY
REC
SLEEP
PLAY
REC
SLEEP
PLAY
PLAY
REC
SLEEP