Using Eco Mode - Kenmore KM1000 Use & Care Manual

Using Your Water Optimizer
that can be toggled by pressing the
illuminate only when
1. To toggle to
always
remain illuminated.
2. To toggle to never
will turn off.
3. To toggle back to
Dispenser Light Button

Using ECO Mode

Your Water Optimizer is equipped with an environmentally aware energy saving feature
called ECO Mode. This feature will power down the heating and cooling systems when
it senses the room's ambient light has been significantly reduced. It will power back up the
heating and cooling system once it senses the ambient light levels have returned to their
normal level.
By default, this feature is enabled, which is indicated by the
ECO Mode/Filter Rest Button
When
ECO Mode
1. To disable ECO
ECO Mode/Filter Rest Button
2. To re-enable ECO
ECO Mode/Filter Rest Button
Please Note:
Should you experience any issues with ECO Mode engaging at unwanted times, it may be
due to an insufficient ambient light levels (when the lights are turned on). To resolve, either
try relocating the appliance to an area that will expose the appliance to higher levels
of ambient light (when the lights are turned on), or disable ECO Mode by pressing
ECO Mode/Filter Rest
B
dispensing.
illuminate, press
illuminate, press
illuminate only when
one last time. Button will re-illuminate.
being illuminated white.
C
is active, the
Mode, simply press and release the
once. The light will turn off.
Mode, simply press and release the
again. The light will turn back on to white.
Button.
Dispenser Light
B
Dispenser Light Button
B
Dispenser Light Button
dispensing, press
ECO Mode/Filter Rest Button
Button. By default, it is set to
once. Button will
again. Button light
B
C
will illuminate green.
C
C
Using Your Water Optimizer 11
C