Sharp CD-BA2100 Operation Manual page 6

(Continued)
(Main unit operation)
(Main unit operation)
2 "AA" size batteries (UM/SUM-3, R6, HP-7 or
similar)
Batteries are not included.
8" - 20'
(0.2 m - 6 m)
Demo mode
When the AC power cord is first connected, the unit will enter
the demonstration mode.
To cancel the demonstration mode:
When the unit is in the stand-by mode (demonstration mode),
press the X-BASS/DEMO button.
The demonstration mode will be canceled and the unit will be
in the low power consumption mode.
To return to the demonstration mode:
When the unit is in the stand-by mode, press the X-BASS/DEMO
button again.
Notes:
When the unit is in the low power consumption mode, the
display will disappear.
When the power is on, the X-BASS/DEMO button can be used
to select the extra bass mode.
To change the brightness of the display
Press the DIMMER button.
The display will be made dimmer.
To return to the original brightness:
Press the DIMMER button again.
When bright
When dark
Remote control
When inserting or removing the batteries, push them toward
the
Installing the batteries incorrectly may cause the unit to mal-
function.
Precautions for battery use:
Insert the batteries according to the direction indicated in the
battery compartment.
Replace all old batteries with new ones at the same time.
Do not mix old and new batteries.
Remove the batteries if they are weak or if the unit will not be
used for long periods of time. This will prevent potential
damage due to battery leakage.
Caution:
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
Notes concerning use:
Replace the batteries if the operating distance is reduced or if
the operation becomes erratic.
Periodically clean the transmitter LED on the remote control
and the sensor on the main unit with a soft cloth.
Exposing the sensor on the main unit to strong light may in-
terfere with operation. Change the lighting or the direction of
the unit.
Keep the remote control away from moisture, excessive heat,
shock, and vibrations.
5
ë
battery terminals.