Remote Control - Sharp CD DHS1050P Operation Manual

System connections (continued)
Make sure to unplug the AC power cord before making any connections.
Plug in with the lever side
facing to the top.
AC outlet (AC 120 V ~ 60 Hz)

Remote control

Battery installation
Use 1 "AA" size battery (UM/SUM-3, R6, HP-7 or
similar). Battery is not included.
1
Open the battery cover.
2
Insert the battery according to the direction indicated
in the battery compartment.
When inserting or removing the battery, push it toward
the battery terminal.
3
Close the battery cover.
Wire
Caution:
Remove the battery if the unit will not be used for a
long period of time. This will prevent potential damage
due to battery leakage.
Do not use rechargeable batteries (nickel-cadmium
battery, etc.).
Installing the battery incorrectly may cause the unit to
malfunction.
Batteries (battery pack or batteries installed) shall not
be exposed to excessive heat such as sunshine, fi re
or the like.
Notes concerning use:
Replace the battery if the operating distance is reduced
or if the operation becomes erratic.
Periodically clean the transmitter on the remote control
and the sensor on the unit with a soft cloth.
Exposing the sensor on the unit to strong light may
interfere with operation. Change the lighting or the
direction of the unit.
Keep the remote control away from moisture, heat,
shock, and vibrations.
E-4
TV
To video input
jack
Video cable
(not supplied)
FM antenna
External FM
antenna for
better reception
(not supplied)
AM loop antenna