Time Schedule - Samsung SND-5080 User Manual

setup screen
To use the IV analysis function according to the whole area based rule
1. Set <IV analysis function> to
<Enable>.
2. Set the event rule to <Entire area
based rules>.
3. Select a desired <Entire Area Rules>.
Appearing : An event where an object
that has not existed suddenly
appears will be detected.
Disappearing : An event where an object that has existed suddenly disappears will
be detected.
Scene Change : An event where the screen is changed at more than a certain time
interval will be detected.

You can set the <Scene Change> rule along with rules : <Appearing> and <Disappearing>.
4. Click [OK].
5. When done, click [Apply].

Time Schedule

You can configure so that an event will occur at a scheduled time regardless of the actual
occurrence of the event.
1. From the Setup menu, select the
<Event (
2. Click <Time Schedule>.
To set the timer event
1. Set <Timer Event Setup> to Enable.
2. Specify the <Activation time>.
Always : Always sends an image at
the set interval.
Only scheduled time : Periodically
transfers image only at a specified
time and date.
3. Specify the <Transfer interval>.
82_ setup screen
)> tab.