Samsung SND-5080 User Manual page 14

overview
Reset Button
Power Port
GND
Network Port
I/O Port
Video Out Port
14_ overview
Resets the camera settings to the default. Press and hold it for about 5
seconds to turn off the system indicator and restart the system.
J
Resetting the camera requires reconfiguration of network settings (IP
address, subnet mask, gateway address etc.) using the IP Installer
software application.
Used to plug the power cable.
Used for earth-grounding.
Used to connect a PoE or LAN cable.
ALARM IN Used to connect the alarm input signal.
ALARM OUT Used to connect the alarm output signal.
ALARM COM Common port where the alarm output signal is connected.
GND Used for earth-grounding.
Video signal output port connected to the monitor.