Sharp XV-Z15000 Operation Manual page 16

Quick Start
4.
Turn the video equipment on and start playback
5.
Select the input mode
Press HDMI1 on the remote control to select "HDMI1" for the Input mode.
• Press HDMI1, HDMI2, COMPONENT, S-VIDEO, VIDEO and COMPUTER on the remote control to
switch the Input mode.
• Press P or R to select your desired input mode when you press INPUT on the remote control or on the
projector.
6.
Adjust the projector angle, focus and zoom
1. The focus is adjusted by
rotating the focus ring.
Focus ring
7.
Turn the power off
Press STANDBY/ON on the projector or STANDBY on the remote control, then press that button again
while the confi rmation message is displayed, to put the projector into standby mode.
On the projector
STANDBY/ON button
1
2
-14
(Continued)
Playback
HDMI1 button
2. Zooming is adjusted by
rotating the zoom ring.
On the remote control
HDMI1
Component
1080P
3. The projector angle is
adjusted by using the
adjustment feet.
Zoom ring
• When the image is distorted
trapezoidally, the keystone
correction is needed.
(See page 24.)
On-screen display
1
STANDBY
button
Page 26
Page 23
Adjustment feet
Page 22