Sharp XV-Z15000 Operation Manual page 12

Part Names and Functions
Projector (Rear View)
Terminals
COMPONENT terminals
Terminal for connecting video
equipment with component
output terminal.
RS-232C terminal
21
Terminal for
controlling the
projector using a
computer.
COMPUTER/COMPONENT
input terminal
Terminal for computer RGB and
component signals.
Remote control
12
sensor
Carrying handle
For carrying the projector.
Using the Kensington Lock
• This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security System.
Refer to the information that came with the system for instructions on how to use it to secure the projector.
-10
18
18, 20
Using the Carrying Handle
When transporting the projector, carry it by the carrying handle on the side.
• Always close the lens shutter to prevent damage to the lens when transporting
the projector.
• Do not lift or carry the projector by the lens as this may damage the lens.
(Continued)
18, 19
HDMI1, 2 terminals
Terminal for connecting video
equipment with HDMI output
terminal.
S-VIDEO input
18, 19
terminal
Terminal for
connecting video
equipment with an
S-video terminal.
VIDEO input
18
terminal
Terminal for
connecting
video equipment.
Security bar
Kensington Security
Standard connector
AC socket
22
Connect the supplied
power cord.