Step 4: Door Removal And Reinstallation - Thermador PROFESSIONAL PRO GRAND Installation Instructions Manual

Hide thumbs Also See for PROFESSIONAL PRO GRAND:
Table of Contents

Advertisement

Available languages

Available languages

1. Remove the door trim by loosening the 2 Torx screws
attaching it to the range. Slide the trim up and off the
screws.
2. To remove the pallet bolts use (2) ½'' (13 mm)
wrenches, one to hold bolt at the bottom while the other
is loosening the nut at the top. Discard the wood
packing block inserts.
Figure 8: Removal of Shipping Bolts
3. Carefully tilt the range back and remove it from the
pallet. Use additional help as required to remove from
pallet.
4. After transporting the range by dolly close to its final
location, the range can then be tipped back while the
dolly is carefully removed.
5. THE FLOOR UNDER THE LEGS SHOULD BE
PROTECTED BEFORE PUSHING THE UNIT INTO
POSITION.
Steps 5 through 8 must be completed before the
range is placed in its final position.
Installation Instructions
Figure 7: Door Trim Removal
STEP 4: Door Removal and
Adjustment
CAUTION
USE CAUTION WHEN REMOVING THE DOOR.
THE DOOR IS VERY HEAVY.
Make sure oven is cool and power to the oven has
been turned off before removing the door. Failure to
do so could result in electrical shock or burns.
The oven door is heavy and fragile. Use both hands
to remove or replace the door.
Failure to grasp the oven door firmly and properly
could result in personal injury and product damage.
With the door off, never release the levers and try to
close the hinges. Without the weight of the door, the
powerful springs will snap the hinges closed with
great force.
To Remove the Oven Door
1. Be sure to read the above
2. Open the door fully.
3. Flip hinge clip down. A
4. Close the door gently until it
5. Grasp the door firmly on the
6. Place the door in a safe and
CAUTION before attempting
to remove the door.
screwdriver may be require to
carefully pry the clip back.
stops against the hinge clips.
The open hinge clips will hold
the door open at a slight
angle, about 30°, from the
closed position.
ends of the door. Lift the door
up and out. There will be
some spring resistance to
overcome.
stable location.
Figure 9: Door Removal
English 13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Prg486nlgPrl364jdgPrl366jgPrl486jdgPrl364nlgPrl486nlg

Table of Contents