Sharp Notevision PG-D40W3D Operation Manual page 41

"Network" menu
Pict. SCR PRJ Network
Password
DHCP Client
TCP/IP
MAC Address X X : X X : X X : X X : X X : X X
Projector XX -X XX X
SEL./ADJ. ENTER
"Help" menu
Pict. SCR PRJ Net.
There is no picture or audio
Vertical stripes or flickering image appear
Data image is not centered
Color is faded or poor
Picture is dark
The image is distorted
It is difficult to hear audio
Set up HDMI CEC function
Reset all adjustments to default settings
SEL. SEL ENTER
Main menu Main menu
Network Network
Help
Disable
Off
END
Help
END
Password [Enable/Disable] Password [Enable/Disable]
Page Page 49 49 Page Page 49 49
DHCP Client [On/Off] DHCP Client [On/Off]
Page Page 50 50
TCP/IP TCP/IP
Page Page 50 50
MAC Address MAC Address
Page Page 50 50
Projector Projector
Page Page 50 50
The items you can set with the
"Help" menu
"Help" menu n Page
• Vertical stripes or fl ickering image appear
Auto Sync/Clock/Phase
• Data image is not centered
Auto Sync/H-Pos/V-Pos/Resolution
• Color is faded or poor
COMPUTER1/2 input
Signal type: Auto/RGB/Component
S-VIDEO or VIDEO input
Video System: Auto/PAL/SECAM/
HDMI input
Dynamic range: Auto/Standard/Enhanced
* The selectable items vary depending on the input
signal and the selected input mode.
• It is diffi cult to hear audio
Balance/Treble/Bass
• Set up HDMI CEC function
One Touch Play
On : This enables One Touch Play.
Off : This disables One Touch Play.
System Standby
On : This enables System Standby.
Off : This disables System Standby.
* When enabling One Touch Play/System Standby,
be sure to enable the CEC setting on the HDMI-
compliant Sharp Video Products connected to
the projector.
51
NTSC3.58/NTSC4.43/
PAL-M/PAL-N/PAL-60
37