Sharp Notevision PG-D40W3D Operation Manual page 27

Equipment
connected equipment
Audio equipment
audio output
RCA audio
HDMI output
Monitor
Amplifi er
audio input
RCA audio
Note
• When using the ø3.5 mm mono audio cable, the volume level will be half of when using the ø3.5 mm
stereo audio cable.
• You can select "Audio 1", "Audio 2" or "HDMI" for "Audio Input" in the "PRJ-ADJ" menu. (See page
46.)
• RGB signals and Component signals can be output to the monitor. HDMI input video signal would
not be output.
This projector is able to process the following signals when connected to HDMI
equipment:
• Video signal: For details, see "Digital Support" in the list of "Computer Compatibility Chart" on page 58.
• Audio signal: Linear PCM audio
• Sampling frequency: 48kHz/44.1kHz/32kHz
Terminal on
ø3.5 mm ø3.5 mm stereo or mono audio cable
(commercially available or available
terminal as Sharp service part QCNWGA038WJPZ)
RCA audio cable (commercially available)
output
terminal
Cables for a camera or a video game
Audio
output
terminal
HDMI cable (commercially available)
terminal
RGB RGB cable (supplied or commercially
input available)
terminal
ø3.5 mm stereo or mono audio cable
ø3.5 mm
(commercially available or available
as Sharp service part QCNWGA038WJPZ)
terminal
ø3.5 mm stereo minijack to RCA audio cable
(commercially available)
input
terminal
Cable
Terminal on the
projector
AUDIO 1
AUDIO 2
HDMI
MONITOR OUT
AUDIO OUT
23