Sharp AR-M451N Operation Manual page 74

SADDLE STITCH FINISHER
I I I I Staple jam removal
1 Unlatch the saddle stitch finisher and slide
it away from the machine.
2 Open the front cover.
3 Turn roller rotating knob C as shown in the
illustration until the blue indication is
seen.
Roller rotating
knob C
Blue
4 Remove the paper from the stapler
compiler.
3-20
5 If saddle stitch was selected, open the
saddle stitch section cover.
6 Remove the misfed paper.
7 Close the saddle stitch section cover.
Open the front cover and pull out the
8
stapler unit.
Be careful not to tear the
misfed paper during
removal.