Checking Displays - Sharp IM-DR400E Operation Manual

Checking Displays

IM-DR400E
! To check the elapsed time and remain-
ing time of the track
1
During playback, press the MENU/ENTER
button.
2
Press the or button repeatedly to se-
lect "DISPLAY".
3
Press the MENU/ENTER button.
4
Press the or button.
Each time the or button
is pressed, the display will
change as follows.
Track name
Elapsed playback time
Remaining playback time
Notes:
" If the disc name or the track name was not originally
recorded on the MiniDisc, "NO NAME" will be dis-
played.
" Elapsed playback time and remaining playback time
may be different from the actual time.
" The selected display will not change even after the
disc is replaced.
28
IM-DR400E TINSE0562AWZZ
! To check the remaining recording time
and the total playing time
1
Whilst in the stop mode, press the MENU/
ENTER button.
2
Press the or button repeatedly to se-
lect "DISPLAY".
3
Press the MENU/ENTER button.
4
Press the or button.
Each time the or button
is pressed, the display will
change as follows.
A
Disc name
Remaining recording time
B
Total playing time
C
Notes:
" Remaining recording time varies depending on the set
recording mode.
" Remaining recording time will not be displayed with a
playback only MiniDisc.
03/7/21 IM-DR400E_4.fm
A
B
C