Maintenance; Specifications - Sharp DK-A10, DK-A10BK Operation Manual

If trouble occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
If such a problem occurs, do the following:
1 Set the unit to the stand-by mode and turn the power on again.
2 If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory by
resetting it.
Clearing all the memory (reset)
1 Press the ON/STAND-BY button to enter the power stand-by
mode.
2 While pressing down the SNOOZE/DIMMER button and the
E SOUND/DEMO button, press the ON/STAND-BY button until
"CLEAR ALL" appears.
SNOOZE/
E SOUND
DIMMER /DEMO
Caution:
This operation will erase all data stored in memory including clock,
alarm settings and tuner preset.
Before transporting the unit
Remove the iPod and the disc from the unit. Then, set the unit to the
power stand-by mode. Carrying the unit with iPod left docked might
damage both the unit and the iPod.

Maintenance

Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap
solution, then with a dry cloth.
Caution:
Do not use chemicals for cleaning (gasoline, paint thinner, etc.). It
may damage the cabinet finish.
Do not apply oil to the inside of the unit. It may cause malfunctions.

Specifications

As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
General
Power source AC 120 V, 60 Hz
Power 33 W
consumption
Output power Front speakers: RMS: 4W (2W + 2W) (10% T.H.D.)
Subwoofer: RMS: 10W (5W + 5W) (10% T.H.D.)
Speaker 1-way type light-up speaker system
Front Speaker: 2-1/2"(6.5 cm) - 12 ohms - Full Range
Subwoofer: 4" (10 cm) - 8 ohms - Full Range
Speaker Front Speakers: 4W
maximum Subwoofer: 10W
input power
Speaker rated Front Speakers: 2W
input power Subwoofer: 5W
Output Headphones: 16 - 50 ohms
terminals (recommended: 32 ohms)
Video output: 1Vp-p
Input Auxiliary (audio signal):
terminals 500 mV/47 k ohms
Dimensions Width: 19-11/16" (500 mm)
Height: 5-7/8" (150 mm)
Depth: 9-7/8" (250 mm)
Weight 11.7 lbs. (5.3 kg)
Tuner
Frequency range FM: 87.5 - 108 MHz
AM: 530 - 1,720 kHz
DK-A10
DK-A10BK
29