Listening To The Ipod - Sharp DK-A10, DK-A10BK Operation Manual

Listening to the iPod

DK-A10
DK-A10BK
Supported iPod:
iPod nano (software 1.0 above)
iPod photo (software 1.0 above)
iPod mini (software 1.2 above)
5th Generation iPod (software 1.0 above) (Dock connector
equipped Click Wheel model)
4th Generation iPod (software 3.0.2 above) (Dock connector
equipped Click Wheel model)
3rd Generation iPod (software 2.2 above) (Dock connector
equipped Click Wheel model)
Notes:
Once the iPod is connected to the unit it will begin charging.
The iPod unit cannot be charged while the main unit is in the
stand-by mode.
Auto power on function:
When you press any of the following buttons, the unit turns on.
iPod button (main unit): The unit turns on and the "iPod" function
is activated.
/ button (main unit and remote control): The unit turns on and
playback of the last function will start (iPod, CD, TUNER, AUX).
14
iPod adaptor connection
Choose the iPod adaptor that fits your iPod. Your iPod will fit snuggly
into the correct adaptor. If your iPod is not mentioned below, an iPod
adaptor may have been included with your iPod unit.
The number (3-10)
shows which iPod fits
iPod iPod Description
Adapter
No.
3 iPod mini
4 4G iPod & U2 iPod
5 4G iPod
6 iPod photo & Color U2 iPod
7 iPod photo
6 iPod with color display
7 iPod with color display
8 iPod nano
9 iPod (10/12/05 w/video)
10 iPod (10/12/05 w/video)
Note:
If you have an iPod that does not have an iPod connector, you can
use an audio cable to connect it to the AUX IN jacks.
7
Capacity
4GB & 6GB
20GB
40GB
20GB & 30GB
40GB & 60GB
20GB
60GB
2GB & 4GB
30GB
60GB