Thank you for choosing the Sharper Image BBQ Grill Light and Fan. Please take a
moment to read this guide and store it for future reference.
HOW TO MOUNT THE BBQ GRILL LIGHT AND FAN
1. Unscrew and remove the mounting
bracket bolts (1) from the upper and
lower mounting brackets (2) and (3).
2. Make sure the BBQ Grill Light & Fan is
centered across the grill handle (5) so
that it sits inside the openings of the
13. Tabs
upper and lower mounting brackets (2)
and (3).
14. Battery
3. Partially screw in place the mounting
compartment
bracket bolts (1). Adjust the BBQ Grill
cover
Light & Fan to your desired angle and
securely tighten bolts (1).
4. To adjust the distance between the BBQ
Grill Light & Fan and the grill, loosen
the adjustment knob (8) then slide the
product up or down on the adjustment
loops (7). When you're satisfied, tighten
the adjustment knob (8) securely.
BBQ GRILL LIGHT AND FAN
Item No. 206635
User Guide
NOTE: It may be necessary to remove the
rubber spacers (4) from the upper and lower
mounting brackets if your BBQ grill's handle
is too thick.
1. Mounting bracket
bolts
2. Upper mounting
bracket
3. Lower mounting
bracket
4. Rubber spacers
11. Fan control button
5. Grill handle
10. Light control
button
9. Light module
8. Adjustment knob
7. Adjustment
loops
6. Fan module