Displaying An Image From Hdmi Equipment; Input Skip - Sharp Aquos LC-42D62U Operation Manual

Using external equipment
Press MENU to display the MENU screen,
and then press ......
/~
to select "Option".
Press
./T
to select "Input Skip", and then
press ENTER.
Press ..
IT
to select the Input (INPUT 4 or
INPUT 5) you wish to skip, and then press
ENTER.
This setting allows you to skip the HDMI Input on the
Input Selection operation.
Press MENU to display the MENU screen,
and then press
~/~
to select "Setup".
To watch an HDMI equipment image,
select "INPUT4" or "INPUT5" from "INPUT
SOURCE" menu using INPUT on the remote
control unit or on the TV.
Press ..
IT
to select "HDMI Setup", and then
press ENTER.
Press ......
/~
to select "Yes", and then press
ENTER.
Press MENU to exit.
Press ..
IT
to select the desired item and
press ENTER.
Press ..
IT I ...... /~
to select the desired
setting and press ENTER.
Signal
Type
RGB
YCbCr 4:4:4
YCbCr 4:2:2
Select the video signa! type from
the HDMI terminal.
Auto View Enable
Disable
Set whether or not to use
View Mode based on signal
recognition, including an HDMI
signal.
Audio
Select
Digital
Analog
Select "Digital" for an audio
signal via the HDMI terminal.
Select "Analog" for an audio
signal via the R-AUDIO -L
terminal.
Press MENU to exit.
• Refer to your external equipment operation manual for the
signal type.
• "Signal Type" is only available when an HDMI-DVI
conversion cable is connected.
• "Audio Select" is only available for INPUT 4.
• When connecting an HOMI-OVI conversion adapter/cable
to the HOMI terminal, the image may not come in clearly.
@-30