Picture Adjustments; Opc Setting - Sharp Aquos LC-42D62U Operation Manual

Basic adjustment settings
Adjusts the picture to your preference with the following
picture settings.
Press
MENU
to display the MENU screen,
and then press
~/~
to select "Picture".
Press ..
IT
to select a specific adjustment
item.
Press ......
/~
to adjust the item to the desired
level.
Press
MENU
to exit.
Automatically adjusts the brightness of the screen.
Press MENU to display the MENU screen,
and then press
~/~
to select "Picture".
Press ..
IT
to select
"ope".
Press ......
/~
to select "On" or "On: Display".
• For resetting all Picture adjustment items to the factory
preset values, press
J1.1...,
to select "Reset", press ENTER,
press ......
/~
to select "Yes", and then press ENTER.
Off
On
On: Display
The brightness is fixed at the value set
in "Backlight".
Automatically adjusts
Displays the OPC effect on the screen
while adjusting the brightness of the
screen.
rSiil,iMI:li!lM
_, Picture
Backlight The screen dims The screen
brightens
Contrast For less contrast For more contrast
Brightness For less brightness For more brightness
Color For less color For more color
intensity intensity
Tint
Skin tones become Skin tones become
purplish greenish
Sharpness For less sharpness For more sharpness
• Select "Advanced" and then press ENTER to set "Color
Temp.", "Black", "3D-Y/C", "Monochrome", "Film Mode" or
"Range of OPC". See page 26.
Press
MENU
to exit.
• When set to "On", the OPC senses the surrounding light
and automatically adjusts the backlight brightness. Make
sure nothing obstructs the OPC sensor, which could affect
its ability to sense surrounding light.
• When set to "On: Display", OPC effect displays on the
screen while the OPC adjusts the screen brightness.
@-25