Quick Reference - Sharp LC-37DB5U Operation Manual

QUICK REFERENCE

STOP! To safely remove the AQUOS television from the box
It's best to use 2 people to remove the AQUOS television for stability.
1. Use the cardboard holders on either side of the AQUOS television to remove it from
the box.
2. Remove the cardboard; however, keep the wrapping on the AQUOS television to
protect it while moving.
3. Lift onto installation location as the diagram illustrates.
Ventilation & Cleaning Tips
Keep your AQUOS television in a well ventilated area and make sure not to place it by a
heat source or use near water. The AQUOS television is designed for AC use only and
should be used with supplied AC cord.
Clean the screen by spraying a soft lint free cloth with water to lightly moisten. Gently wipe
and avoid pressing on the screen. To clean the outer cabinet, use the same method. Do
not use liquid or aerosol cleaners.
The screen is glass and can be scratched or broken when dropped or impacted.
QUICK INSTALLATION TIPS
1. Facing the back of the AQUOS television, remove
the terminal cover.
2. Attach your antenna to the back of the TV.
(See page 13.)
3. Connect the AC plug for the AQUOS television into
the wall outlet.
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES WITH
THE AC CORD CONNECTED.
6
Press down the upper
hooks to remove the
cover toward you.
4. Place the Ferrite core in the space indicated in the
below figure and bundle the cords properly with a
cable clamp and cable tie, and close the terminal
cover.
5. How to turn on the AQUOS television for the first
time.
A) Press POWER on AQUOS television.
B) POWER indicator on the front of the AQUOS
television lights GREEN.
POWER indicator
NOTE
• Speaker cannot be detached from the TV.
• TV angle cannot be adjusted.
POWER