Using external equipment
Displaying an external equipment
image
To view external source images, select the input
source from INPUT on the remote control unit or on
the TV.
Press INPUT.
1
• A list of selectable sources appears.
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
INPUT5
INPUT6
INPUT7
7
Press INPUT again to select the input source.
2
• An image from the selected source automatically
displays.
• Each time INPUT is pressed, the input source
toggles.
• You can also select the input source by pressing
a/b.
• If the corresponding input is not plugged in, you
cannot change the input. Be sure to connect the
equipment beforehand.
NOTE
• See pages 13 to 16 for external equipment connection.
• You can toggle INPUT 1 and INPUT 4 by pressing GAME
on the remote control unit. (See page 13.)
Input Select
If the image does not come in clearly from the external
equipment connected to INPUT 1 or INPUT 7 (DVI) you
may need to change the input signal type setting on
the "Input Select" menu.
Selecting input signal type (INPUT 1)
Press MENU to display the MENU screen, and
1
then press c/d to select "Option".
Press a/b to select "Input Select", and then
2
press ENTER.
Option
Audio Only
Digital Noise Reduction
Input Select
Output Select
Press a/b to select the signal type you want
3
to set, and then press ENTER.
• If the selected signal type is incorrect, images are
not displayed or displayed without any color.
Auto
COMPONENT
VIDEO
Press MENU to exit.
4
• The setting is stored and can be selected on the
"INPUT SOURCE" menu.
NOTE
• Refer to your external equipment operation manual for the
signal type.
• If you set INPUT 1 to Auto, the TV will automatically select
the input signal.
• Check the operation manual of the external equipment for
the signal type.
• Setting INPUT 1 signal selection to "Auto" when other
equipment is connected will result in the following
connection priority.
INPUT 1:
1 COMPONENT VIDEO
2 VIDEO
[Off]
[Auto]
[Fixed]
31