Sharp LC-32D42U Operation Manual page 49

Other viewing options
1
2
1
2
48
■ Cable control buttons
When the FUNCTION is set to CBL/SAT, the cable converter connected to
the TV can be operated using 1 to 4.
1 SOURCE POWER
Turns the cable converter power on and off.
2 0–9
Press a button (or buttons) that corresponds to the channel that you wish
to watch.
3 FLASHBACK *
Press to switch between the current channel and the channel you were
3
watching immediately before.
4 CH r / s
4
Press CH r or CH s to tune in a higher or lower channel.
* Some manufacturers do not preset FLASHBACK.
NOTE
• CABLE and SAT cannot be selected at the same time.
■ SAT control buttons
1 SOURCE POWER
Turns the cable converter power on and off.
2 0–9, • (DOT)
Press a button (or buttons) that corresponds to the channel that you wish
to watch.
3 ENTER, a / b / c / d
ENTER: Press to activate the selected function.
a / b / c / d : Press the button to select items on the SAT GUIDE screen
or SAT MENU screen.
NOTE
• CABLE and SAT cannot be selected at the same time.
3