Power Control; Digital Setup; Audio Setup - Sharp LC-32D42U Operation Manual

Basic adjustment settings

Power Control

Power control setting allows you to save energy.
No signal off
When set to "Enable", the power will automatically shut
down if there is no signal for 15 minutes.
Press MENU to display the MENU screen, and
1
then press c / d to select "Power Control".
Press a / b to select "No Signal Off", and then
2
press ENTER.
Press c / d to select "Enable", and then press
3
ENTER.
Enable
• Five minutes before the power shuts down, the
remaining time displays every minute.
Press MENU to exit.
4
NOTE
• "Disable" is the factory preset value.
• When a TV program fi nishes, this function may not operate.
No operation off
When set to "Enable", the power will automatically shut
down if there is no operation for 3 hours.
Press MENU to display the MENU screen, and
1
then press c / d to select "Power Control".
Press a / b to select "No Operation Off", and
2
then press ENTER.
Press c / d to select "Enable", and then press
3
ENTER.
• Five minutes before the power shuts down, the
remaining time displays every minute.
Press MENU to exit.
4
NOTE
• "Disable" is the factory preset value.
28

Digital Setup

This setting allows you to optimize the settings of
Digital broadcasting.

Audio Setup

You can output digital audio to an AV amplifi er or
similar device whose DIGITAL AUDIO INPUT terminal
is connected to the DIGITAL AUDIO OUTPUT terminal
on the TV. Please select an audio output format
compatible with the audio format of the program you
are watching and the equipment connected.
Press MENU to display the MENU screen, and
1
then press c / d to select "Digital Setup".
Press a / b to select "Audio Setup", and then
2
press ENTER.
Press a / b to select "PCM" or "Dolby Digital",
3
Disable
and then press ENTER.
Selected item
PCM
Dolby Digital
Press MENU to exit.
4
PCM
Dolby Digital
Description
The optical output terminal outputs audio
signal in PCM form. If your digital audio
system does not support Dolby Digital,
select "PCM".
The optical output terminal outputs audio
signal in Dolby Digital form. It reproduces
sound from surround program of digital.