Surround; Bass Enhancer; Power Control - Sharp LC LC-52D64U Operation Manual

Basic adjustment settings

Surround

Surround function allows you to enjoy realistic "live"
sound.
Press MENU to display the MENU screen, and
1
then press c/d to select "Audio".
Press a/b to select "Surround", and then
2
press ENTER.
Press c/d to select "On", and then press
3
ENTER.
Press MENU to exit.
4
NOTE
• You can choose Surround by pressing SURROUND on
the remote control unit. (See page 19.)
• Audio menu is grayed out when Output Select is set to
"Variable".
• For some discs, setup may be required on your DVD
player. In this case, please refer to the operation manual of
your DVD player.

Bass Enhancer

This function allows you to enjoy bass-enhanced
sound.
Press MENU to display the MENU screen, and
1
then press c/d to select "Audio".
Press a/b to select "Bass Enhancer", and
2
then press ENTER.
Press c/d to select "On", and then press
3
ENTER.
Press MENU to exit.
4
NOTE
• Audio menu is grayed out when Output Select is set to
"Variable".

Power Control

Power control setting allows you to save energy.
No signal off
When set to "Enable", the power will automatically shut
down if there is no signal for 15 minutes.
Press MENU to display the MENU screen, and
1
then press c/d to select "Power Control".
Press a/b to select "No Signal Off", and then
2
press ENTER.
Press c/d to select "Enable", and then press
3
ENTER.
Enable
• Five minutes before the power shuts down, the
remaining time displays every minute.
Press MENU to exit.
4
NOTE
• "Disable" is the factory preset value.
• When a TV program fi nishes, this function may not operate.
No operation off
When set to "Enable", the power will automatically shut
down if there is no operation for 3 hours.
Press MENU to display the MENU screen, and
1
then press c/d to select "Power Control".
Press a/b to select "No Operation Off", and
2
then press ENTER.
Press c/d to select "Enable", and then press
3
ENTER.
• Five minutes before the power shuts down, the
remaining time displays every minute.
Press MENU to exit.
4
NOTE
• "Disable" is the factory preset value.
Disable
29