Sharp LC LC-52D64U Operation Manual page 55

Other viewing options
8
2
4
6
3 10
5
6
2
1
8
■ VCR control buttons
The remote control unit button will function as follows when the FUNCTION
of the remote control unit is set to VCR.
• Press INPUT until the input connected to the VCR is selected. The following 1 to 8
can be used to control the VCR.
CH r/s
1
7
Press to select the channel of the TV tuner on the VCR.
3
2 SOURCE POWER
5
Turns the power of the VCR on and off.
F
3
Sets pauses and still pictures.
G
4
Rewinds the tape and allows picture search.
H
5
Stops the tape transport.
1
6 REC
Starts recording.
J
7
Rapidly advances the tape and allows picture search.
I
8
Starts playback.
■ DVD control buttons
The remote control unit button will function as follows when the FUNCTION
of the remote control unit is set to DVD.
• Press INPUT until the input connected to the DVD player is selected. The following 1
to 10 can be used to control the DVD player.
L
1
Pressing quickly once takes you to the start of the next chapter. Each time you
press it, you move ahead to the start of the next chapter.
K
2
9
4
Pressing quickly once takes you to the start of the chapter currently playing.
Each time you press it, you move back to the start of the previous chapter.
3 SOURCE POWER
Turns the power of the DVD player on and off.
F
4
Sets pauses and still pictures.
G
5
Hold down to go in reverse.
H
6
Playback stops when pressed.
7 With some DVD players, pressing the button twice may open the disc tray.
7 MENU
When this button is pressed, the DVD menu will display.
ENTER, a/b/c/d
8
ENTER: Press to activate the selected function.
a/b/c/d: Press the button to select items on the DVD
J
9
Hold down to fast forward.
10 I
Starts playback.
MENU screen.
53