Auto Sync. Adjustment (Pc Input Mode Only); Fine Sync. Adjustment (Pc Input Mode Only) - Sharp Aquos LC 37HV4U Operation Manual

Useful adjustment settings
Auto Sync. adjustment (PC input
mode only)
For automatically adjusting the PC image.
MENU TV/SAT/DVD
RETURN MENU
SOURCE
POWER
SET/
ENTER
FAVORITE CH
A B
POWER INPUT
RECEIVER
1
Press MENU and the PC MENU screen
displays.
2
Press c/d to select "Setup".
• Setup menu displays.
3
Press a/b to select "Auto Sync.", and then
press SET/ENTER.
4
Press c/d to select "Yes", and then press
SET/ENTER.
• Auto Sync. starts and "Adjusting the image"
displays.
PC MENU
Setup
Auto Sync.
Yes
NOTE
• When Auto Sync. is successful, "Auto Sync completed
successfully" displays. If not, Auto Sync. failed.
• Auto Sync. may fail even if "Auto Sync completed
successfully" displays.
• Auto Sync. may fail with a PC image composed of similar
patterns or monochrome. If not successful, change the
PC image and try again.
• Be sure to connect the PC to the AVC System and switch
it on before starting Auto Sync.
DTV/DVD TOP
MENU
DTV/SAT
GUIDE
DTV/SAT
INFO
VCR REC
C D
VOL VOL
No
30%
Fine Sync. adjustment (PC input
mode only)
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In some cases, however, manual adjustment is needed
to optimize the image.
MENU TV/SAT/DVD
RETURN MENU
SOURCE
POWER
SET/
ENTER
FAVORITE CH
A B
POWER INPUT
RECEIVER
1
Press MENU and the PC MENU screen
displays.
2
Press c/d to select "Setup".
• Setup menu displays.
3
Press a/b to select "Fine Sync.", and then
press SET/ENTER.
4
Press a/b to select the specific
adjustment item.
Setup
Fine Sync.
H-Pos. [0] –90
V-Pos. [0] –60
Clock [0] –90
Phase [0] –20
Reset
5
Press c/d to adjust the item to your
desired position.
NOTE
• For resetting all adjustment items to the factory preset
values, press a/b to select "Reset", and then press SET/
ENTER.
Selected item
Centers the image by moving it to the left
H-Pos.
or right.
Centers the image by moving it up or
V-Pos.
down.
Clock Adjusts the clock frequency.
Adjusts the clock phase.
Phase
DTV/DVD TOP
MENU
DTV/SAT
GUIDE
DTV/SAT
INFO
VCR REC
C D
VOL VOL
+90
+60
+90
+20
Description
49