Initial Setup - Sharp Aquos LC 37GB5U Operation Manual

Watching TV

Initial setup

When you turn on the TV for the first time, it will automatically memorize the broadcasting channels where you
live. Perform the following steps before you press TV POWER on the remote control unit.
1. Insert the batteries into the remote control unit. (See page 7.)
2. Connect the antenna cable to the TV. (See page 13.)
3. Plug in the AC cord to the AC outlet. (See page 6.)
Language setting
Select from among 3 languages: English, French and
Spanish.
1
Press a/b to select the desired language
listed on the screen, and then press ENTER.
Language
Air/Cable
CH Search
Antenna setting
Make sure what kind of connection is made with your TV
when selecting "Air" or "Cable".
2
Press c/d to select "Air", "Cable" for
ANALOG.
Press ENTER to enter the setting.
Language
Air/Cable
CH Search
English
Français
Español
Example
ANALOG Air
Channel search
Channel auto search makes the TV look for all channels
viewable in the set area.
3
Press c/d to select "Yes" for ANALOG, then
press b to move down.
Press c/d to select "Yes" for DIGITAL (Air),
then press b to move down.
Select "Search Start", and then press
ENTER.
Language
Air/Cable
CH Search
Example
CH Search
ANALOG Air [ 25 ]
CH Search
DIGITAL Air [ 25 ]
Air ANALOG
2
Audio :
NOTE
• If no channel is found, make sure what kind of connection
is made with your TV and try EZ setup again. (See page
20.)
ANALOG Yes No
DIGITAL (Air) Yes No
Search Start
Found [ 20 ]
Found [ 20 ]
MONO
15