Initial Setup - Sharp Aquos LC 26GD4U Operation Manual

Watching TV

Initial setup

When you turn on the TV for the first time, it will automatically memorize the broadcasting channels where you
live. Perform the following steps before you press TV POWER on the remote control unit.
1. Insert the batteries into the remote control unit. (See page 13.)
2. Connect the antenna cable to the Display. (See pages 17 to 19.)
3. Plug in the AC cord to the AC outlet. (See page 10.)
Language setting
Select from among 3 languages: English, French and
Spanish.
1
Press a/b to select the desired language
listed on the screen, and then press ENTER.
Language
TV Guide On Screen
Air/Cable
CH Search
Antenna setting
Make sure what kind of connection is made with your TV
when selecting "Air" or "Cable" for both ANALOG-A and B.
2
Press c/d to select "Air" or "Cable" for
ANALOG-A, then press a/b to move down.
Press c/d to select "Air" or "Cable" for
ANALOG-B.
Press c/d to select "Air" or "Cable" for
DIGITAL (Cable), then press a/b to move
down.
Press ENTER to enter the setting.
• This operation makes the System search for
both ANALOG-A and B.
• There are 3 kinds of CATV system, including
Standard, HRC and IRC. Select the one
matches to your TV. Select Auto when you do
not know which one to select.
Language
Air/Cable
CH Search
ANALOG-A
ANALOG-B
DIGITAL
Language
Air/Cable
CH Search ANALOG-A
ANALOG-B
DIGITAL
English
Français
Español
Example
Air
Air
Cable (STD)
Air
Air
Cable STD
Channel search
Channel auto search makes the System look for all
channels viewable in the set area.
3
Press c/d to select "Yes" for ANALOG-A,
then press a/b to move down.
Press c/d to select "Yes" for ANALOG-B,
then press a/b to move down.
Press c/d to select "Yes" for DIGITAL (AIR/
Cable), and press UP/DOWN to move down.
Select "Search Start", and then press
ENTER.
Language
Air/Cable
ANALOG-A
CH Search
ANALOG-B
DIGITAL
Search Start
DIGITAL (Cable)
CH Search
ANALOG-A Air
CH Search
ANALOG-B Cable
CH Search
DIGITAL Cable
ANALOG-A
Audio
NOTE
• Make sure what kind of connection is made with your TV
when selecting "Air" or "Cable" for both ANALOG-A, B
and DIGITAL.
• If no channel is found, make sure what kind of connection
is made with your TV and try EZ setup again (see page
27).
Yes No
Yes No
Yes No
Example
[ 25 ] Found [ 20 ]
[ 25 ] Found [ 20 ]
[ 25 ] Found [ 20 ]
Air
2
: MONO
21