Connecting The Power Cord - Sharp FO-IS115N Operation Manual

Basic Setup
Attach the document exit tray.
After inserting
the tray, flip out
the extension

Connecting the power cord

Plug the power cord into a 220 - 230 V, 50 Hz, earthed AC outlet.
♦
Do not plug the power cord into any other kind of outlet. This will damage
the machine.
♦
The power outlet must be installed near the equipment and must be easily
accessible.
♦
Whenever you unplug the power cord, wait at least 5 seconds before
plugging it back in.
♦
When disconnecting the machine, unplug the telephone line cord before
unplugging the power cord.
♦
If your area experiences a high incidence of lightning or power surges, it is
recommended that you install surge protectors for the power and telephone
lines. Surge protectors can be purchased from your dealer or at most
telephone specialty stores.
14