Grizzly G0860 Owner's Manual page 25

26. Insert filter handle spindle so one of two M6-1
x 16 cap screw tips aligns with flat on side of
filter paddle spindle, then tighten both cap
screws to secure (see Figure 24).
Filter
Handle
Spindle
Figure 24. Filter handle spindle attached to
canister filter assembly.
27. Slide filter paddle cover over filter handle
spindle, then secure with (6)
flange bolts (see Figure 25).
x 6
Filter
Handle
Spindle
Figure 25. Installing filter paddle cover.
Model G0860/G0861/G0862 (Mfd. Since 10/18)
28. Install filter cleaning handle on spindle so that
x 2
29. Attach plastic filter bag to canister filter and
⁄ "-18 x ⁄ "
5 3
16 4
Filter
Paddle
Cover
Figure 27. Filter bag attached to canister filter.
M6-1 x 16 hex bolt tip aligns with spindle flat,
then tighten hex bolt (see Figure 26).
Hex
Bolt
Figure 26. Filter handle installed on spindle.
secure with bag clamp (see Figure 27).
Filter
Handle
Canister
Filter
Bag Clamp
Filter Bag
-25-