Ash Trays; Head Restraints - Mercedes-Benz 560 SL 1986 Owner's Manual

Ash tray
Removal of ash tray:
■ k Pull out ash tray up to the stop.
A Depress center locking spring (1)
and remove ash tray.
^ To install ash tray:
Position ash tray squarely and push
in.
84

Head Restraints

Removing head restraints:
Bring the head restraint to it's
highest position.
Depress release button (1) unter
the seatback covering material and
pull head restraint up sharply, hold­
ing it by the left head restraint post
(viewed in driving direction). Then
pull out head restraint completely
with both hands.
The release button (1) is located
below the left head restraint post
on both seats.
Installing head restraints:
Insert the head restraint and push
it down to the stop.
Check if the highest position can
be reached. (Pull handwheel out
and rotate it rearward to the stop.)
Adjust head restraint to the desired
position.
Warning!
For your protection, drive only
with properly positioned head
restraints.
Do not drive the vehicle without
the head restraints. Head
restraints are intended to help
reduce injuries during an
accident.
For positioning of head restraints
refer to pages 29 and 30.