Spare Wheel, Jack, Vehicle Tool Kit
The spare wheel (1) is stored in a
compartment below a hinged cover
(2) in the trunk floor.
>
To raise cover, roll back the floor
mat and engage holding strap (3) in
the trunk lid.
68
Open cover (4) by turning latch (5)
fully to the left.
The jack (6) and tool kit are located
behind cover (4).
Warning!
The jack is designed exclusively
for jacking up the vehicle at the
jack tubes built into either side of
the vehicle. Use the jack only to
lift the vehicle during a tire
change. Never get beneath the
vehicle while it is supported only
by the jack. Jack stands must be
used when working under the
vehicle. Always set parking brake
before raising vehicle with the
jack. For details, refer to
"Changing Wheels".