Inserting a MiniDisc
1
2
3
4
Notes:
z Do not place the MiniDisc under the holder.
z If any resistance is felt, do not force the MiniDisc into
the unit, as it may cause damage to the unit. If resist-
ance is felt, remove the MiniDisc and reload it.
z The lid cannot be opened if "TOC" is displayed refer to
the instruction on page 13.
Web-site: www.sharp.co.uk/support
Slide the OPEN lever to release the com-
partment door.
Lift it up.
Insert a MiniDisc as shown.
Close the compartment door.
Help Line: 08705 274277 (office hours)
9