Table of Contents
Advertisement
Chapter 1: Before You Get Started
Display
Dot matrix
display
• During actual use, not all symbols are displayed at the same time.
• Only the symbols required for the usage under instruction are shown in the
display and calculation examples of this manual.
: Indicates some contents are hidden in the directions shown.
Press cursor keys to see the remaining (hidden) section.
BUSY : Appears during the execution of a calculation.
: Appears when @ is pressed.
2ndF
xy/r θ
: Indicates the mode of expression of results in the complex
calculation mode.
: Indicates that H has been pressed and the hyperbolic functions
HYP
are enabled. If @ > are pressed, the symbols '2ndF HYP'
appear, indicating that inverse hyperbolic functions are enabled.
ALPHA: Appears when ;, @ a, x or t is pressed.
FIX/SCI/ENG: Indicates the notation used to display a value.
DEG/RAD/GRAD: Indicates angular units.
: Appears when statistics mode is selected.
M
: Indicates that a value is stored in the M memory.
14
Mantissa
Symbol
Exponent
Advertisement
Table of Contents
