Pcl Settings - Sharp MX-2600N Operation Manual

Item
Output
Quick File
*1 When a saddle stitch finisher or finisher is installed.
*2 This setting is used to adjust the line width of vector graphics (black & white printing only). Except for CAD and other
specialized uses, there is normally no need to change this setting. Information on the selections is shown in
"Selections for the line thickness
*3 Paper sizes that can be used with this function are A3, B4, A4, 11" x 17", 8-1/2" x 14", and 8-1/2" x 11". (This function
may not take effect with some print methods.)
*4 Only effective when printing PDF, JPEG, and TIFF files.
Selections for the line thickness setting
Selection 0
Minimum
Percentage
line width*
* All lines are the minimum line width.

PCL Settings

This is used to set the symbol sets, fonts, and line feed code used in a PCL environment.
Settings
Item
PCL Symbol Set Setting
PCL Font Setting
PCL Line Feed Code
Wide A4
• (Use Print per Unit)
• (Do not use Print per Unit)
• Staple Position*
• (Use Punch)
• (Do not use Punch)
• (Disabled)
• (Enabled)
setting" (page 7-22).
1 2 3
50% 75% 90%
Description
Specify the symbol set used for
printing.
Use this to select the font used for
printing.
This setting is used to select how
the printer responds when a line
feed command is received.
When this is enabled, 80
characters per line can be printed
on A4 size paper using a 10-pitch
font. (When this setting is
disabled, up to 78 characters can
be printed per line.)
Selections
1
: None, 1 Staple at Back, 2 Staples, 2 Staples (Top)
4 5 6
95% 100% 105%
Select from 35 items.
• Internal Font
• Extended Font
(List of internal fonts when extended fonts are not
installed.)
• 0.CR=CR; LF=LF; FF=FF
• 1.CR=CR+LF; LF=LF;FF=FF
• 2.CR=CR; LF=CR+LF; FF=CR+FF
• 3.CR=CR+LF; LF=CR+LF; FF=CR+FF
• (Enabled)
• (Disabled)
7-22
SYSTEM SETTINGS
7 8 9
110% 125% 150%
Selections
Contents