Before Using The Appliance For The First Time; Cleaning Accessories; Applying The Program Label; Operation - Bosch 800 SERIES Use And Care Manual

Hide thumbs Also See for 800 SERIES:
Table of Contents

Advertisement

Available languages

Available languages

Before using the appliance for the first time

Appliance must be properly installed by a qualified
technician before use.
Remove all packing materials from inside and outside
the oven.
While cool, wipe with a clean, damp cloth and dry.
There may be a slight odor from your new appliance;
this is normal and will disappear after a short time.
Optimum cooking results depend on proper cookware
being used.
Read and understand all safety precautions and Use
and Care Manual information.

Operation

Setting the clock

The clock can be set in 12-hour mode.
Touch Clock once.
1.
Enter the time using the number keys.
2.
Example: To set the clock to 12:41 type in 1 2 4 1.
Touch Clock to confirm.
3.
The time of day is displayed.

Setting the Kitchen Timer

You can set a timer value of up ot 99 minutes and
99 seconds.
Touch Kitchen Timer.
1.
The
symbol lights up and
Â
Enter the desired time using the number keys.
2.
Touch Kitchen Timer to confirm.
3.
The Kitchen Timer starts counting down.
Once the set time has elapsed 4 beeps will sound. To
stop the beep, touch Kitchen Timer.
To cancel the kitchen timer, touch Kitchen Timer again
or open the appliance door.

Operating the Ventilation Fan

The Vent feature moves steam and other cooking vapors
from the cooking surface of the range below the
microwave oven.
You can set four different vent speeds.
Set the vent feature by touching Vent (high/low). The
ventilation symbol
will light up on the display.
¾
Vent level
Touch Vent
(high/low) key
once
4 (high)
twice
3
3 times
2
4 times
1 (low)
5 times
OFF
:
is blinking.
‹‹
‹‹
Display
•‚
–‹
OFF
Execute the following sections prior to operating:
The appliance must be completely fitted and connected.

Cleaning accessories

Before using accessories for the first time, thoroughly
clean them with hot soapy water and a soft dish cloth.

Applying the program label

Apply the included program label in the desired
language to the lower frame of the oven cavity, as
indicated on the leaflet that carries the label.
Note: If the temperature gets too hot around the
microwave oven, the fan of the vent feature will
automatically turn on at the lowest setting to cool the
oven. The fan will automatically turn off when the internal
parts are cool. When this occurs, the vent cannot be
manually turned off.

Turning the Surface Light on/off

The appliance is equipped with a cooking surface light,
to light the surface underneath the appliance.
With the Light key you can set two brightness levels.
Brightness
Touch Light key
High
once
Low
twice
Off
three times

Turning the turntable on / off

For best cooking results, leave the turntable on. It can be
turned off for large dishes.
To turn the turntable off, touch Turntable (on/off) once.
The
Á
symbol and
‹""
key again to turn the turntable on. The
lights up briefly.
‹Ÿ
CAUTION
9
Sometimes the turntable can become hot. Be
careful touching the turntable during and after
cooking.
Do not run the oven empty.
Do not operate the oven without the turntable in
place.
lights up briefly. Touch the
symbol and
Á
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hmv8044c

Table of Contents