Overview; 5496 Description; Agency Requirements; About This Manual - Honeywell 5496 Installation And Operation Manual

Section 1

Overview

1.1

5496 Description

The Model 5496 Intelligent Power Module provides additional power and notification
circuits to a Silent Knight addressable FACP. The 5496 can power all IntelliKnight
compatible notification appliances and auxiliary power modules.
The 5496 is capable of performing single or dual interlocking operations for pre-action
and deluge releasing systems. See Section 8.6 of FACP installation manual.
The 5496 has four output circuits that can be configured as notification or auxiliary
power circuits. Outputs are rated 3.0 A (6.0 A total for each 5496).
The 5496 is optically isolated, providing ground loop isolation and transient
protection.
The 5496 provides configuration options that eliminate the need for sychronization
modules when using AMSECO, Faraday, Gentex, System Sensor, or Wheelock
synchronization appliances.
1.2

Agency Requirements

The 5496 has the same requirements as the main control panel. These requirements
are listed in Silent Knight addressable FACP Installation Manuals. Silent Knight
Addressable FACP Installation Manuals can be found on Silent Knight's web site at
www.silentknight.com.
1.3

About This Manual

This manual covers installation of 5496 hardware. Software configuration information
is contained in a Silent Knight addressable FACP Installation Manuals. Silent Knight
Addressable FACP Installation Manuals can be found on Silent Knight's web site at
www.silentknight.com.
1.4

How to Contact Silent Knight

If you have a question or encounter a problem not covered in this manual, contact
Silent Knight Technical Support at 800-446-6444.
To order parts, contact Silent Knight Sales at 800-328-0103 or (203) 484-7161.
1-1
151276-L8