151276-L8
3.3
Connecting the 5496 to the FACP
1. Connect the 5496 to the appropriate SBUS. The 5496 is connected directly to a
Silent Knight addressable FACP.
2. Use the on-board dipswitch to assign an ID number to the 5496. (See Section
3.3.1) Figure 2-1 shows the location of the dipswitches on the 5496 board.
3. Configure the 5496 module by adding it to the system (through JumpStart or
manually). You can also assign a name to the module. These procedures are
described in Silent Knight addressable FACP Installation Manuals. Silent Knight
Addressable FACP Installation Manuals can be found on Silent Knight's web site
at www.silentknight.com.
5820XL
(Main SBUS)
Supervised
Power Limited
Figure 3-3 Class B 5496 Connection to FACP
3-3
Hardware Installation
5496 Board