Table of Contents
Advertisement
MISFEED REMOVAL
The copier will stop when a misfeed occurs. The misfeed (
and blinking red misfeed location indicators will indicate the approximate misfeed
location.
If paper is accidentally torn during removal, be sure to remove all pieces.
Be careful not to damage the photoconductive drum.
A
C
Location A
Feeding roller cover
Location B
Right side cover
) indicator will blink
First confirm the misfeed location.
Misfeed in the SPF
If an original misfeed occurs in the SPF, the copier will
stop and the red indicator which indicates an original
B
misfeed will blink.
1
Open the feeding roller cover and pull the original gently
to the left and out from the document feeder tray. Close
the feeding roller cover.
2
If the misfed original cannot be removed in step 1, open
the right side cover and remove the misfed original.
Close the right side cover.
(P. 43)
(P. 44, 47)
(P. 47)
43
Advertisement
Table of Contents
