Table of Contents
Advertisement
Units digit
Tens digit
For photographs, select PHOTO (
(
) and dark (
There are 5 exposure steps indicated by 3 indicator lights. (The
indicators light up one or two at a time.)
If exposure level 2 is selected, the two left-handmost indicators for that
level will light up simultaneously. Also, if level 4 is selected, the two
right-handmost indicators for that level will light up simultaneously.
6
Set the number of copies using the two copy quantity
(
,
) keys.
Press the right copy quantity key to set the units digit from 0 to 9. This
key will not change the tens digit.
Press the left copy quantity key to set the tens digit from 1 to 9.
A single copy can be made with the initial setting, i.e., when "0" is
displayed.
Press the CLEAR (
7
Press the START (
The number in the copy quantity display will decrease by 1 each time
a copy is made.
Press the CLEAR (
To repeat the same copy sequence for a different original, simply
replace the original and press the START (
NORMAL COPYING
) and then adjust with the light
) keys as desired.
) key to clear an entry if a mistake is made.
) key.
) key to stop copying in the middle of a run.
) key.
19
Advertisement
Table of Contents
