Table of Contents
Advertisement
LOADING COPY PAPER
Left guide
14
Changing the copy paper size in the tray
1
Gently lift and pull out the paper tray until it stops.
Push the pressure plate down until it locks in place.
2
3
Squeeze the lock lever of the front guide and slide the
front guide to match the width of the paper.
Move the left guide to the appropriate slot as marked on
4
the tray.
When using 5-1/2" x 8-1/2" copy paper, load it into the upper paper
Front guide
tray. If the lower tray is used, paper misfeeds may occur.
When using 11" x 17" copy paper, store the left guide in the slot at the
left front of the paper tray.
Load copy paper into the tray.
5
6
Place the appropriate label to indicate the selected
paper size into the recess on the right front side of the
paper tray.
7
Push the paper tray firmly back into the copier.
Advertisement
Table of Contents
