Replacement Parts - Broan SMSK102 Instructions

Hide thumbs

page of 4

/ 4
Bookmarks

RESTORING POWER TO CONTROLLER

The control stores all of its settings in a nonvolatile memory, so they

are not lost when power is removed. In the event of a power loss, the

controller will automatically return the load being controlled to the

state that it had been in before the power was interrupted.

HOW TO RESTORE CONTROLLER FACTORY DEFAULT SETTINGS

The factory reset procedures can be used to clear controller's memory

and restore its factory default settings.

Soft Reset

1. Push the SET Button and hold for 10 seconds — then release.

2. Press the SET Button — then release.

3. Push the SET Button and hold for 10 seconds — then release.

4. The status LED turns off when you release the SET button. The fan

load will turn on for 5 seconds, indicating a completed reset. The

controller will now begin running the Broan SmartSense

as a Master, after an approx. 1½-hour delay. All memory and links

have been cleared.

COMBINING FAN / CONTROL PACKAGES

1. More than one fan / control package can be linked together.

Example:

(1) SMSK102 + (1) SMSK103 = A ﬁve fan Broan

SmartSense

system.

Example:

(2) SMSK103 =

A six fan Broan SmartSense

tem.

2. Only one phase coupler should be installed when multiple pack-

ages are combined.

3. A controller can have up to 10 slaves.

REPLACEMENT PARTS

Control (110 cfm ventilator)

Control (80 cfm ventilator)

Phase Coupler

WARRANTY

Broan-NuTone warrants to the original consumer purchaser of its products that such products will be free from defects in materials or workmanship for a period of one year from the date of original

purchase. THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

During this one-year period, Broan-NuTone will, at its option, repair or replace, without charge, any product or part which is found to be defective under normal use and service.

THIS WARRANTY DOES NOT EXTEND TO FLUORESCENT LAMP STARTERS, TUBES, AND FUSES. This warranty does not cover (a) normal maintenance and service or (b) any products or parts which have

been subject to misuse, negligence, accident, improper maintenance or repair (other than by Broan-NuTone), faulty installation or installation contrary to recommended installation instructions.

The duration of an implied warranty is limited to the one-year period as speciﬁed for the express warranty. Some states do not allow limitation on how long an implied warranty lasts, so the above

limitation may not apply to you.

BROAN-NUTONE'S OBLIGATION TO REPAIR OR REPLACE, AT BROAN-NUTONE'S OPTION, SHALL BE THE PURCHASER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. BROAN-NUTONE SHALL

NOT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH PRODUCT USE OR PERFORMANCE. Some states do not allow the exclusion or

limitation of incidental or consequential damages, so the above limitation may not apply to you.

This warranty gives you speciﬁc legal rights, and you may also have other rights, which vary from state to state. This warranty supersedes all prior warranties.

To qualify for warranty service, you must (a) notify Broan-NuTone at the address or telephone number below, (b) give the model number and part identiﬁcation and (c) describe the nature of any

defect in the product or part. At the time of requesting warranty service, you must present evidence of the original purchase date.

Broan-NuTone LLC, 926 West State Street, Hartford, WI 53027 (1-800-637-1453)

program

sys-

Model SMSC110

Model SMSC080

Model SMSCPLR

BROAN-NUTONE ONE YEAR LIMITED WARRANTY

MODELS SMSK102 • SMSK103

HOW TO CHANGE CONTROL COLOR TO ALMOND

An almond rocker/frame kit is included with the control. Remove the

4 screws holding the white rocker/frame in place. Replace white rock-