Download Print this page

A.O. Smith RPV series Installation Instructions And Use & Care Manual page 7

Electric tankless water heater

Advertisement

General Specifications
Models
Wiring & Circuit Breaker
Requirements
Water Connections
Weight
lbs. (kg)
Water Heater
Dimensions*
* Height dimension includes the distance from the bottom of the heater to the highest point of the inlet/outlet.
Width dimension includes the mounting tabs on the left-hand and right-hand sides (two- and four-chamber models).
NOTE:
• Check the rating plate to ensure this product matches your specifications.
• The manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and
without incurring obligations.
• The maximum working pressure is 150 psi. The water supply pressure should not exceed 80 psi. If this occurs, a pressure
reducing valve with a bypass should be installed in the cold water inlet line.
• Maximum flow may require water pressure equal to or greater than 40 psi.
Point-of-Use:
RPV, CPV
See "Electrical Requirements" on page 8.
3/4" NPT
8 lbs. (3.6 kg)
H 16-5/8" x W 6-1/2" x D 7-3/16"
(H 42.2cm x W 16.5cm x D 18.3 cm)
Two Chamber:
R2V, C2V
3/4" NPT
13 lbs. (5.9 kg)
H 17-3/4" x W 11-1/2" x D 6-1/8"
(H 45.1 cm x W 29.2 cm x D 15.6 cm)
Electric Tankless Water Heater
Four Chamber:
R4L, C4L, R4M, C4M
3/4" NPT
20 lbs. (9 kg)
H 18-1/8" x W 17" x D 6-1/8"
(H 46 cm x W 43.2 cm x D 15.6 cm)
7

Hide quick links:

Advertisement

loading