Sony HT-S100F Operating Instructions Manual page 9

K:\081\Win7 CS\new\4727410111_HT-S100F_US-CaFR-
LaES\01US\030PAC.fm
010COV.book Page 9 Thursday, September 7, 2017 11:33 AM
About the indicators on the Bar Speaker
Lighting and flashing of the indicator(s) on the Bar Speaker indicate the input or
status of the input device.
Indicators Status
• Lights: TV input is selected.
• Lights in blue: BLUETOOTH connection is established (BLUETOOTH input is
selected).
• Flashes quickly in blue: While waiting for connection with a device.
• Flashes in blue: While reconnecting or performing pairing.
• Lights: USB input is selected.
• Flashes twice: The play mode is changed.
• Flashes three times first, then flashes slowly repeatedly: When connecting an
unsupported device.
• Flashes repeatedly: While reading data of the connected USB device.
The indicators flash when turning on/off the function setting or operating the remote
control.
Indicators Status
• Flashes twice: One of the following functions is set to on.
– Night mode (page 20)
– Voice mode (page 20)
• Flashes once: The audio channel is set to Main (page 21), the sound mode is
selected (page 20), or one of the following functions is set to off.
– Night mode (page 20)
– Voice mode (page 20)
• Flashes twice: One of the following functions is set to on.
– Dolby DRC (page 21)
– Control for HDMI (page 25)
– BLUETOOTH standby (page 24)
– BLUETOOTH function (page 24)
– Auto standby (page 26)
– IR repeater (page 16)
• Flashes once: The audio channel is set to Sub (page 21) or one of the following
functions is set to off.
– Dolby DRC (page 21)
– Control for HDMI (page 25)
– BLUETOOTH standby (page 24)
– BLUETOOTH function (page 24)
– Auto standby (page 26)
– IR repeater (page 16)
• Flash once: The audio channel is set to Main/Sub (page 21).
• Flash quickly: The protection feature is activated (page 30).
• Flash slowly: The system enters standby mode by the auto standby
function (page 26).
masterpage:
Right
9
US
HT-S100F
4-727-410-11(1)