Sennheiser EM500 Instruction Manual page 29

Using the operating menu
Display Function of the menu item
"Easy Setup"
Reset List Releases all locked frequency presets
Current List Selects an unused frequency preset
Scan New List Scans for unused receiving frequencies (frequency preset scan)
Exit Exits
Extended menu "Advanced Menu"
Tune Sets the receiving frequencies for the frequency banks "U1" to "U6"
Sets the frequency bank, the channel and the transmission
frequency (frequency banks "U1" to "U6")
Guitar Tuner Selects the mode of the guitar tuner function
Sync Settings Calls up the
Adjusts the parameters to be transferred to the transmitters and
activates/deactivates the transfer (see below)
Pilot Tone Activates/deactivates the pilot tone evaluation
Warnings Calls up "Warnings": Activates/deactivates warnings
(color change and warning messages)
LCD Contrast Adjusts the contrast of the display panel
Reset Resets the settings made in the operating menu
IP-Address Adjusts the IP address of the receiver
Software Revision Displays the current software revision
Exit Exits the extended menu
to the main menu
"Sync Settings"
SK Settings Adjusts the parameters to be transferred to the SK transmitters
and activates/deactivates the transfer
SKM Settings Adjusts the parameters to be transferred to the SKM radio
microphone and activates/deactivates the transfer
Exit Exits the
menu
28
"Easy Setup" and returns to the main menu
"Sync Settings" submenu:
"Advanced
"Sync Settings" submenu and returns to the extended
"Advanced Menu"
Menu" and returns
Page
35
-
39
40
40
41
42
43
43
44
44
44
-
41
-