Sennheiser EM500 Instruction Manual page 14

Secure the rack mount "ears"
previously removed recessed head screws (see right-hand diagram).
Fitting the
device feet
Clean the base of the receiver where you want to fix the device feet.
Fit the device feet to the four corners of the receiver as shown.
Place the receiver on a flat, horizontal surface.
Connecting the The supplied rod antennas
rod antennas suitable for all applications where – good reception conditions provided –
a wireless transmission system is to be used without a large amount of
installation work.
Connect the two rod antennas
rear of the receiver.
Align the rod antennas upwards in a V-shape.
Do not fit the device feet when mounting the receiver into a
19" rack.
Putting the receiver into operation
to the sides of the receiver using the
can be mounted quickly and easily and are
to the BNC sockets and at the
13