Table of Contents
Advertisement
On the mobile hotspot:
1. On the home screen, tap Settings.
2. Tap Factory Reset.
On the AT&T Wi-Fi Manager home page:
1. On the home page, click Settings in the left-side menu.
2. Click the Advanced > Device Reset tab.
3. Click Reset.
4. Click Yes.
5. After the device has reset, reconnect Wi-Fi devices.
Advanced Settings
This chapter provides information on how to configure advanced settings for various
aspects of the device such as Wi-Fi settings, WAN settings, router settings, etc.
Manage Wi-Fi
Set Wi-Fi network options
To configure the Wi-Fi network options:
1. On the AT&T Wi-Fi Manager home page, log in as Administrator.
2. Click Settings in the left-side menu.
3. Click Wi-Fi > Advanced Settings tab.
4. For the Main Wi-Fi and Guest Wi-Fi networks, select the desired options.
• Band Selection--The Wi-Fi band range used for the selected network. 2.4 GHz uses
less power and is longer ranged than 5 GHz, but 5 GHz can provide higher speeds with
less interference.
• Network Mode--The WLAN protocol being used. The recommended value depends
on the band range selected:
· 2.4 GHz--802.11 b/g/n
· 5 GHz--802.11 n only
• Frequency (Channel)--The Wi-Fi channel used. The recommended value is
Automatic, which chooses the channel that will provide the least interference.
5. Click Apply.
Change Advanced Settings
View WAN information
To view detailed network information, such as the active network, connection status,
signal strength, etc.:
1. On the AT&T Wi-Fi Manager home page, log in as Administrator.
2. Click About.
29
Hide quick links:
Advertisement
Table of Contents
