Sony GTK-XB60 Operating Instructions Manual page 16

6
Make sure that a BLUETOOTH
connection has been
established.
Once a BLUETOOTH connection
is established, the system will
emit a notification sound, and the
(BLUETOOTH) indicator on the
unit will stop flashing and remain
lit up.
Depending on the BLUETOOTH
device, connection may start
automatically after pairing is
completed.
Notes
• You can pair up to 8 BLUETOOTH devices.
If the 9th BLUETOOTH device is paired, the
oldest paired device will be deleted.
• If you want to pair with another
BLUETOOTH device, repeat steps 1 to 6.
• If the last connected BLUETOOTH device
is nearby, a BLUETOOTH connection will
be established automatically and the
BLUETOOTH indicator will light up. If you
want to connect another BLUETOOTH
device, turn off the BLUETOOTH function
on the connected device or turn off the
power on the connected device.
16
GB
GTK-XB60/XB90.4-697-227-11(1)
To cancel the pairing operation
Press FUNCTION PAIRING.
To terminate the BLUETOOTH
connection
Turn off the BLUETOOTH function on
the connected device.
Note
Depending on the BLUETOOTH device, the
BLUETOOTH connection may be terminated
automatically when you stop playback.
Erasing all the pairing
registration information
To erase all of the pairing registration
information, the system needs to
be restored to the factory default
settings. See "Restoring the system
to the factory default settings"
(page 37).
Note
Once all the pairing information on the
system has been erased, iPhone/iPod touch
may not be able to connect to the system.
In this case, delete the pairing information
for the system from iPhone/iPod touch, and
then perform the pairing procedure again.
One
Con
NFC (N
a tech
wirele
variou
and IC
When
NFC-c
system
—turn
—com
BLU
Com
Sma
func
later
Note
• The
conn
smar
anot
to th
NFC-
disco
• Depe
smar
follo
smar
— Tu
re
th
— If
ha
An
th
"N
fo
ob
ap
so
1
Tu
BL
sm
GTK-X