Searching For A Sound Source; Adjusting The Volume - Sennheiser HDR 145 Instruction Manual

found, the channel search stops. You hear the signal of the
found sound source.
If you do not hear the sound source after a short while, please
refer to the chapter "If a problem occurs ..." on page 12.
Switching the headphones off
Set the ON/OFF switch
to the position OFF.
The headphones switch off.

Searching for a sound source

Make sure that the operation indicator on the transmitter
is lit.
If you do not
search:
Press the TUNE button
until you have found your sound source.
If you cannot find your sound source, please refer to the
chapter "Changing the transmission channel" in the
RS 145 comfort instruction manual.

Adjusting the volume

Use the volume control
sufficient and comfortable level.
5
on the headphones
hear the desired sound source, continue the
3
on the headphones
2
to adjust the volume to a
Using the HDR 145
9